Large-Format Printing Melbourne

Print Ready File Checklist: Prepare Files for Print

Before you send a file for professional printing, check seven things. They are the final size, bleed and safe margins, CMYK colour, 300 dpi images, fonts and links, the export format, and a careful proofread. When all seven are right, your job can go straight to press. Skip one and you risk a delay, a reprint, or a box of brochures with your logo sliced off at the edge.

This print ready file checklist walks you through each step in the order we recommend. We wrote it for Australian small and medium businesses that design their own artwork or brief a designer. It follows the same checks our prepress team runs on customer files at our South Melbourne shop. Prepress simply means the stage between your design and the press, where files are checked and set up to print.

What makes a file print ready: the short answer

A print ready file is one your printer can run without changing a thing. It is built at the correct size and has bleed wherever colour touches the edge. Its colours are set up for ink rather than a screen, and every image and font is included at the right quality. It has also been proofread and signed off, so nobody at the shop has to guess what you meant.

The seven point print ready file checklist at a glance

  1. Confirm the specifications. Before you design, ask your printer for the size, bleed, stock and file requirements.
  2. Set the final size, paper and fold. Build the document at trim size and plan any folds or panels.
  3. Add bleed, trim marks and safe margins. Run backgrounds past the edge and keep important content well inside it.
  4. Work in CMYK. Convert your colours for ink, and plan any spot colours or special finishes.
  5. Check image resolution. Images should be 300 dpi at the size they will appear, and logos should ideally be vector artwork.
  6. Check fonts, links and format. Embed or outline your fonts, include linked images and export a print PDF.
  7. Proofread and run a final check. Read every word, check every number and work through the list.

The order matters. Size and colour mode come first because changing them late can throw out your whole layout. The final checks sit at the end because they catch whatever slipped past the earlier steps.

Why file problems cause delays and reprints

When a job is held up at our counter, the press is rarely the cause. The file usually is, and the same few problems come up again and again. A flyer arrives in RGB, so that bright teal prints muddy. A poster uses a photo saved from a website and comes out blurry. A menu has no bleed, so a thin white line shows along one edge after trimming.

Each of those means a phone call, a fix and a fresh proof. If you are working to a deadline, such as a Friday launch or a trade show on Monday, losing that time really hurts. In our view, fixing problems before you send is almost always quicker than fixing them afterwards.

Step 1: Confirm the printer’s specifications before you design

If you only do one thing from this list, talk to your printer before you start the artwork. Requirements vary between shops, presses and products. A few minutes on the phone can save you hours of rework.

Questions to ask your printer first

Get clear answers to these before you open your design software:

  • What is the finished trim size for this product?
  • How much bleed do you need, and should the PDF include trim marks?
  • How far in from the edge should the safe margin be?
  • Which paper stock or board will it be printed on?
  • Is it CMYK only, or can I use spot colours?
  • What file format and PDF settings do you prefer, and do you have a preset?
  • If it folds, what type of fold is it and how should I lay out the panels?
  • Will there be finishes like spot UV, foil or varnish, and how should I set those up?

Write the answers down and keep them beside you while you work. That page becomes your brief, and it means every later decision rests on your printer’s actual numbers rather than a guess.

Example: a cafe menu built at the wrong size

This is one of the most common problems we catch. A cafe owner designs a new menu in a free app using a default “menu” template, and it looks great on screen. When the file reaches us, the template turns out to be US Letter, the paper size used in North America. The owner had pictured an A4 menu, which is the everyday office size in Australia. The two sizes are close, but they are not the same shape.

Shrinking the file squashes the margins and pushes the prices towards the edge. Enlarging it makes the photos soft. The only clean fix is to rebuild the layout at the right size, and that costs a day the cafe didn’t have. One question up front, “what size do you need?”, would have saved all of it.

Step 2: Set the final size, paper stock and fold

With the specifications in hand, set up your document correctly from the first click. Getting the canvas right at the start is far easier than fixing it later.

Trim size versus document size

The trim size is the finished size of the piece once it is cut, such as A5 or a standard business card. Business card sizes can differ between printers, so confirm the exact measurements before you start. The document size is that trim size plus bleed on every side.

Most professional design programs let you set trim size and bleed separately, which is the cleanest way to work. If your tool doesn’t support bleed, you may need to enlarge the canvas yourself by the bleed amount on each edge. Ask your printer which approach they prefer.

Think about paper stock now as well. A heavy card, a satin paper and an uncoated stock can each change how colours and fine lines print. Knowing your stock early lets you choose colours and type weights that will hold up on it.

Choosing the fold and laying out panels for brochures and menus

The fold you choose changes how the finished piece looks, works and reads. A trifold DL brochure, a gatefold and a simple half fold all feel different in the hand.

With folded work, keep these points in mind:

  • Confirm the fold type with your printer before you lay out any panels.
  • Check the panel widths. On many trifolds, the panel that tucks inside is set slightly narrower so the sheet folds flat. Your printer can give you the exact widths for their folding setup.
  • Map out the reading order. Fold a scrap sheet of paper and number each panel so you know what the reader sees first.
  • Keep text clear of folds. Treat every fold line like an edge and give it some breathing room.

Step 3: Add bleed, trim marks and safe margins

Trimming machines are accurate, but across a full run no cut lands in exactly the same spot every time. Bleed and safe margins give the job room to move without anything going wrong.

How bleed protects your edges

Bleed is extra artwork that runs past the trim line. If a background colour, photo or shape touches the edge, extend it beyond the trim. The right amount depends on the printer and the product, so always use the figure your printer gives you rather than a number from a template or a forum.

When the sheet is cut, the blade passes through that extra area. If the cut drifts a fraction, you still get colour right to the edge instead of a thin white sliver. Trim marks, also called crop marks, show the printer exactly where to cut. Include them in your export if your printer asks for them.

Keeping text and logos inside the safe zone

The safe zone, or safe margin, is a strip just inside the trim line where nothing important should sit. Text, logos, phone numbers, QR codes and page numbers all belong inside it.

A good habit is to set guides for the trim line, bleed line and safe margin before you place a single element. That way you can see straight away if the email address in your footer is creeping too close to the edge.

Step 4: Work in CMYK and plan your spot colours

Colour causes more surprises than anything else in file preparation. Setting the right colour mode before you send is one of the easiest ways to avoid disappointment.

Why RGB screen colours shift on paper

Screens make colour from red, green and blue light, which is called RGB. Presses make colour from cyan, magenta, yellow and black inks, which is called CMYK. Light can produce very bright, glowing colours that ink on paper simply can’t match.

That is why a vivid electric blue or neon green on your monitor can look flatter in print. Switch your document to CMYK before you submit it, then look closely at your colours after the conversion. If an important colour has dulled, adjust it now rather than finding out when the job is printed.

If you need one exact brand colour across every job, ask your printer whether spot colours suit your project. A spot colour is a premixed ink matched to a specific reference, rather than a blend of the four process inks.

Keeping spot inks, foils, varnishes and spot UV on separate layers

Special finishes need their own instructions. If your job includes spot UV, foil, varnish or a spot ink, each should sit on its own layer or be set up as its own named spot colour.

Say you want a glossy spot UV logo on a matte business card. You would supply the full colour artwork, plus a separate layer showing only the logo shape in solid black. The printer uses that layer to tell the machine where the finish goes. If finishes are mixed into the main artwork, there is no clean way to separate them.

Step 5: Check image resolution

Blurry photos are one of the main reasons printed pieces look amateur. Once you know what to look for, the fix is simple.

Why 300 dpi is the working standard

The accepted standard is at least 300 dpi (dots per inch) for images at the size they will appear. At that resolution, fine detail such as hair, fabric texture and small text in a screenshot stays sharp.

The key phrase is “at the size they will appear”. A photo that is 300 dpi at 5 cm wide drops to roughly 150 dpi if you stretch it to 10 cm. You can work out what you need with simple maths. A4 is 210 mm wide, which is about 8.27 inches, and 8.27 times 300 gives roughly 2480 pixels. Do the same for the 297 mm height and a full page A4 photo needs about 2480 x 3508 pixels, so a 1200 pixel wide web image falls well short.

Most design programs show the effective resolution of a placed image, so check it once everything is sized. Images saved from websites or social media are usually small, with low pixel dimensions. Raising the dpi number in an editing program won’t add real detail. You need the original high resolution file, whether it comes from the photographer, the stock library or your phone.

When vector artwork is the better choice

Logos, icons, line drawings and charts are best supplied as vector artwork. Vector files are made of shapes and paths instead of pixels, so they scale to any size without losing quality. AI, EPS, SVG and vector PDF are the common vector formats.

If the only version of your logo is a small JPG from your website, ask your designer for the original vector file. Keep it on hand for every job you will ever do, from business cards to a large shopfront sign.

This step makes sure the file that leaves your computer looks exactly like the one on your screen.

Embedding or outlining fonts

If the printer’s system doesn’t have your font, it may swap in a default, and the typeface you chose so carefully becomes something generic. You can prevent this by embedding the fonts when you export your PDF, or by converting the text to outlines.

Embedding keeps the text editable and is usually handled by your PDF export settings. Outlining turns letters into shapes, which locks them in place but means nobody can edit the words afterwards. Keep a copy of your working file without outlines so you can make changes later.

Check every linked image too. If your layout program flags a missing link, relink the file before you export. Otherwise the image could drop out or print at preview quality.

Exporting a print PDF your printer can use

Most printers ask for a high resolution print PDF. When you export:

  • Use your printer’s PDF preset if they provide one.
  • Choose a high quality or press quality setting rather than “smallest file size”.
  • Include bleed and trim marks if they have been requested.
  • Make sure images aren’t being compressed to a low resolution.
  • Open the exported PDF and zoom right in on images, edges and small text.

Keep your original working files, linked images and fonts together in one folder. If something needs changing, you can export again in minutes.

Step 7: Proofread and run a final handover check

People rush this last step more than any other, and it is exactly where the costly mistakes get through. If you can, print the PDF on your office printer first. Reading on paper picks up things a screen tends to hide.

A printable checklist to tick off before you send (table format)

Print this table and tick off each line before you hand your file over.

Check What to confirm Done
Specifications Size, bleed, safe margin, stock and format confirmed with your printer ☐
Trim size Document built at the correct finished size ☐
Fold and panels Fold type confirmed, panels in the right order and width ☐
Bleed Edge backgrounds and images extend past the trim line ☐
Safe margin All text, logos and QR codes sit inside the safe zone ☐
Colour mode Document set to CMYK, colours reviewed after conversion ☐
Spot colours and finishes Spot inks, foil, varnish or spot UV on separate layers ☐
Image resolution All photos at least 300 dpi at final size ☐
Logos Supplied as vector artwork where possible ☐
Fonts Embedded or outlined ☐
Links No missing or low resolution linked images ☐
Export High resolution print PDF with requested marks ☐
Proofread Spelling, prices, dates, phone numbers and web addresses checked ☐
Approval Final sign off from the decision maker ☐

Common last minute mistakes that slip through

These are the errors our team picks up most often at the file check stage:

  • A wrong phone number or web address. Ring every number and type every URL into a browser.
  • Old prices or dates. They are easy to miss when you reuse last year’s file.
  • Placeholder text. A forgotten “insert headline here” or a block of dummy copy tucked in a corner.
  • A QR code that won’t scan. Test it with your phone on the printed proof, not just on screen.
  • Hairline rules that are too thin. Very fine lines can fade or disappear on paper, so ask your printer for their minimum line weight.
  • Small black text built from four colours. All four inks have to line up perfectly, and in our experience tiny type set this way can look slightly soft. Plain black is the safer choice for body copy.
  • Sending the wrong version. Give your final file an obvious name, such as spring_menu_FINAL_approved.pdf.

How the checklist applies to real jobs

The seven steps stay the same for every job, but where you focus depends on what you are producing. Here are three common examples drawn from the kinds of work that cross our counter.

A small business annual report with photos and charts

An annual report is long, full of images and packed with numbers, so steps 5 and 7 matter most. Ask whoever built the charts for vector versions instead of screenshots from a spreadsheet. Check that every team or project photo holds 300 dpi at its final size, especially the full page images.

Page count is another thing to watch. Bound documents often need a page count that suits the binding method, so confirm it before you finalise the layout. Every figure in the financial pages should be proofread, ideally by someone who didn’t write them. If you have one coming up, our annual report printing team can confirm the specifications before you lock in the design.

A foam board sign for a trade show or shopfront

People view a foam board sign from a distance, so it lives or dies on image quality and safe margins. At large sizes, a photo that looked fine on an A4 flyer may fall well short of the resolution you need. Use the largest original files you have, and supply your logo as vector artwork so it stays crisp at any size.

Keep text well inside the safe zone, especially if the board will sit in a frame or stand that covers the edges. Confirm the exact board size, and whether you want a custom shape, before you start. Our foam board printing page outlines the sizes and options available.

A two sided menu for a busy restaurant

A two sided menu is handled constantly and often laminated, so readability comes first. Confirm the final size and stock, then make sure the front and back line up when you turn the sheet over. Keep prices and dish names inside the safe margin, since menus are often trimmed close for a clean finish.

Proofreading is the step that really counts here. One wrong price can cost you money every service until the next reprint. Ask both the head chef and the manager to sign off the final PDF before it goes to print.

How our prepress team checks your file

You can run the same three checks we do before you send anything. Knowing what a printer looks for also helps you understand the questions you might get back after you submit a file.

First, compare the PDF page size against the size you ordered, and zoom into each corner to confirm bleed runs past every trimmed edge. Next, look at the colour mode and any spot colours or finish layers, so the press and finishing equipment get clear instructions. Then zoom right in on photos, logos and small text to spot low resolution images, missing fonts or lines too thin to print.

When we find a problem, we explain what it is and why it matters before anything is printed. Some issues are a small setting that can be sorted out together. Others, such as a low resolution photo, can only be fixed with a new file from your end. Running these checks yourself first means fewer surprises and a faster path to press.

Ready to Send Your File to Press?

Got your artwork ready but not sure if it’s truly print ready? Let our prepress team check it before it goes to print. We’ll help you catch issues with bleed, colour, image resolution, fonts and file setup, so you can avoid costly delays and reprints.

Send us your artwork today for a file check and get your project ready for press with confidence.

    Get a quote




    Select Shop Location: