What’s the cost of getting a few prints wrong… a few cents or maybe a dollar? When it comes to business printing, and especially at scale, that can quickly turn into a lot of money lost on a big print batch – a rather costly affair for what might be a tiny little mistake.
Here are seven common printing mistakes we often see on our end that can cost business owners lost time and money and how to avoid them as best you can:
There are so many file formats to choose from nowadays that it can be rather confusing choosing the best one for print purposes. In most cases, standard documents are just fine in PDF format. Use this as a safe, all-around pick.
Other file formats like .docx (e.g Microsoft Word or Google Docs) can be used too, but use a print preview to ensure it looks how you want it to – it won’t always look the same as in editing mode!
For photos, it depends on if it’s raster (e.g photographs) or vector (e.g logos or simple designs). In either case, saving to a PDF is safe, or you can consult your local print shop for guidance.
A standard A4 paper is internationally sized at 210 mm x 297 mm. Obviously, nothing beyond that size will get printed, so if your document is incorrectly sized, it won’t print as it appears digitally.
Anything you see digitally beyond the 210×297 (for an A4 paper) boundary is the bleed. The exact boundary is the trim, whereas the “safe” zone for printing is about a 3-5 margin inside of the trim. Even with very accurate, modern printing equipment, you shouldn’t risk putting anything too sensitive outside of the safe zone, and nothing of importance should be within the bleed.
These days, with spellcheckers and AI to help out, you’d think we’d all be producing flawless designs without any little mistakes or typos. Well, they somehow always manage to find a way in, so always spend a few seconds or minutes reviewing the print-ready design.
Catching an error at this stage can save you lots of time and money, especially if you were about to print a big batch!
For most of our printing needs, a standard A4 paper will do. But what about business cards? Engineering drawings? Brochures or custom labels? Or what about wedding invitations where you want something that feels nice to hold? Ask your print shop about paper sizes and card stock and refine your design based around what is available.
Now this one might cost you more time than money, and truth be told, you don’t have to narrow down your prints to the exact number, but there’s a big difference between 10 brochures and 10,000!
Try and estimate how many you will need, bump up by a little factor if you think you’ll need a few extras, and get it “within the ballpark”, as the Americans might say.
If you’re printing across various types of print media, always make sure to print one of each first before doing the whole batch and checking that the colours look as they’re supposed to. Digital colours don’t always “look” the same when printed.
There are many cases where you need a large quantity of printed materials at the last minute, and perhaps there’s no helping it. Professional print shops can produce large volumes, but they’re limited by the speed and number of machines on hand, so there’s no way to manually make it go faster. Try to budget a little time for printing so that you’re not delayed.
Do all of your printing at Print on Demand.